2
Safety
PAD-V
INSTRUCTION
MANUAL
MITA-PAD-V-MAN-IT-
201812
© MITA Cooling Technologies
S.r.l.
16 / 59
• For the electrical power supply, connect the earthing system before making any other connection
to the mains.
• Protect the ducts of the connections to the power supplies using rigid sheaths or suitable cable
glands.
• Perform the required interventions using standard work tools (ladders, harnesses, various tools)
and paying maximum attention to elements that could represent a tripping hazard of cause cuts
and bruises.
• The machine work positions
cannot be occupied until the
machine has been tested: the presence
of any assembly or installation errors could, in fact lead to serious accidents for the operators in
charge of machine operations. Testing must be carried out by the manufacturer's technicians.
• Before proceeding with the testing and putting into service of the
, check that none of its parts
show signs of physical damage due to impact, tears or abrasions and that all the connections
present have been made correctly and without the possibility of disconnection.
• To avoid malfunctions, check that the machine is perfectly level.
2.5.3 Use
Residual risks during machine use
During machine use, there are risks associated with:
• use of the
machine by unqualified, untrained, uninstructed or incorrectly equipped personnel;
• contact with hot or overheated parts during and at the end of processing, for example
• the batteries (external temperature of about 60°C);
• electric motors, in the event of malfunctions;
• moving parts, due to friction, in the event of malfunctions;
• exposure to noise during operations;
• contact with live parts in the event of incorrect maintenance;
• contact with pressurised and/or hot fluids (maximum temperature 90°C) should any valve or pipe
rupture;
• flying particles in the event of:
• breakage of working parts, with projection of the same or of part thereof and/or
the parts being processed;
• rupture of components in the fluid distribution, containment and management
system, with projection of the same or part thereof or of pressurised fluids
• presence of materials/foreign bodies, projected outside the machine guards.
Precautions to be taken during machine use
During machine use, the precautions set out in this paragraph must be observed.
• Only use the machine
if all the protection and safety devices are intact.
• Do not remove the safety devices or guards installed on the machine for any reason.
• Observe all safety and danger signs affixed to the machine:
• Make sure that all safety and danger signs affixed to the machine
are always legible.
• Do not use the machine in any way other than as indicated in the section Intended Use.
• Do not work on or with the machine
without having first read the whole of this manual carefully.
• Use auxiliary equipment and, in any case, any other machinery or tool (electric or pneumatic)
only after having understood the indications provided in the relative Use and Maintenance
Manuals or after having followed specific and formal training.
• Report any abnormal operating conditions immediately.
• Do not perform any operations (including cleaning) while the machine is running or near hot
surfaces.
• Do not attempt to make the machine
perform any operations not contemplated in the instructions
provided in this manual.
• Do not place equipment/pipes/ducts on the machine or any of its components.
