1
General information
PAD-V
INSTRUCTION
MANUAL
MITA-PAD-V-MAN-IT-
201812
© MITA Cooling Technologies
S.r.l.
10 /59
1.4.2. Accompanying documents
Every MITA Cooling Technologies S.r.l. cooler is supplied with a “DECLARATION OF EC CONFORMITY”,
in accordance with Directive 2006/42/EC Annex II A)
– Machinery Directive and also complies with the
following European Directives:
Directive 2014/30/EU
– Electromagnetic Compatibility (EMC);
Directive 2014/35/EU
– Low Voltage Directive.
Said documents are provided as an appendix to this manual.
1.5. After-sales technical assistance
Whenever requesting technical assistance for the machine, always provide the following information:
data given on the identification data plate (machine model, serial number and year of
construction);
approximate number of hours use;
detailed information on the defects encountered.
For any assistance, contact the Manufacturer's Assistance Service.
CAUTION
The Manufacturer declines all liability for accidents involving persons or things caused by a
failure to observe the instructions and regulations provided in this manual or the non-
observance of the safety and accident prevention regulations in force in the country of
machine use.
1.6. Warranty
Any damage resulting from wear and tear of machine parts caused by normal use of the machine
is excluded from the warranty.
MITA Cooling Technologies S.r.l. declines all liability and shall not accept any claims for injuries to people or
damage to property caused by one or more of the following:
inappropriate use of the machine;
failure to observe the use and specific functions of the machine, its limits and capacity;
inadequate or negligent use, inspection or maintenance of the machine;
failure to observe the scheduled maintenance inspections and required checks;
modifications to the machine or its components which have not been expressly approved by
MITA Cooling Technologies S.r.l.
the use of accessories, spare parts and consumables which are not suitable for the machine's use.
1.7. Testing
The machine was tested during the production phases on the manufacturer's premises.