MikroScan 7600PRO, Руководство оператора

Страница: 96 / 309

Section 3
Getting Started
86
MikroScan 7600PRO
Operator’s Manual
Catalog 11180-94
V15.4F 050406
5) Toggle the
jOyStICK
up or down as needed to increase or decrease
the amount of time to wait before the camera enters standby mode.
[AutO StAndby On OPtIOn
HIGHLIGHted]
When activated, the screen will darken and the camera will
enter standby mode when there has been no actvty for the
selected tme perod as set n Step 5.
6) Press the
jOyStICK [e]
button to save the setting and to return to
the main display.
OR
Press the
CAnCeL/VISIbLe [C]
button to cancel out of the auto
standby mode and to return to the main display.
3.9.5.2 Deactivating the Auto Standby Feature
1) If using the Standard Type Menu, go to
[MENU]
→
[SETUP]
→
[AUTO STANDBY]
.
[AutO StAndby HIGHLIGHted]
Standard View Menu
OR
NOTE:
When activated, the
screen will darken and
the camera will enter
standby mode when
there has been no activ-
ity for the selected time
period as set in Step 5.
Press any key to can-
cel the standby mode
and to return to the
normal operation.
The instrument will
then go through the
system check and
normal operation will
resume after approxi-
mately 20 seconds.
• The Auto Standby
feature does not shut the
camera down. It only
places the camera in
standby mode.
• Do not leave the camera
in Standby mode for an
extended period of time
as it will eventually de-
plete the battery charge.
• Be sure to turn the power
button off when the
measurements have been
completed.