MikroScan 7600PRO, Руководство оператора

Страница: 15 / 309

Section 1
General Information
5
MikroScan 7600PRO
Operator’s Manual
Catalog 11180-94
V15.4F 050406
(b) Operation of an intentional, unintentional, or incidental radia -
tor s subject to the condtons that no harmful nterference
s caused and that nterference must be accepted that may
be caused by the operation of an authorized radio station, by
another intentional or unintentional radiator, by industrial,
scientific and medical (ISM) equipment, or by an incidental
radator.
(c) The operator of a rado frequency devce shall be requred to
cease operating the device upon notification by a Commission
representatve that the devce s causng harmful nterference.
Operaton shall not resume untl the condton causng the harm-
ful nterference has been corrected.
1.7 Unpacking and Inspection
The MkroScan 7600PRO thermal magng camera s shpped n a rugged and padded
carrying case along with two battery packs, a battery charger, AC Adapter, memory
card, hand grip, lens cap and operatng manual. A wde varety of optonal accessores
are also avalable ncludng battery belts and auxlary lenses.
When unpacking and inspecting your camera, you need to do the following:
1) Check container contents against the shipping list.
2) Carefully unpack and inspect all components for visible damage.
3) Save all packing materials, including the carrier’s identification
codes, until you have inspected all components and find that there
is no obvious or hidden damage.
Before shipment, the camera was assembled, calibrated, and tested at the Mikron
Factory. If you note any damage or suspect damage, immediately contact the carrier and
Mkron.
The package should be
allowed to stablze at
room temperature before
removng the nstrument
to prevent the formaton
of condensaton.