MikroScan 7600PRO, Руководство оператора

Страница: 187 / 309

Section 6
Data Analysis
177
MikroScan 7600PRO
Operator’s Manual
Catalog 11180-94
V15.4F 050406
6.4.2 Setting Multiple Points
1) Follow steps 1-6 for Setting a Single Point Temperature (See Section
6.4.1).
2) Press the
S [SAVe]
button to establish the temperature point loca-
tion and to once again highlight the
[P. teMP LAbeL]
.
P. teMP x, y LAbeL HIGHLIGHted
teMP. POInt
3) Toggle the
jOyStICK
up to add another temperature point to the
display.
P. teMP LAbeL
P. teMP x, y COORdInAteS
P. teMP
POSItIOn [b]
P. teMP
POSItIOn [a]
The first temperature point will be labeled
[a]
. The next tem-
perature pont wll be labeled
[b]
.
4) Press the
S [SAVe]
button to establish the temperature point and to
highlight the new
[P. teMP x, y COORdInAteS]
.
P. teMP LAbeL
P. teMP x, y COORdInAteS
P. teMP
POSItIOn [b]
P. teMP
POSItIOn [a]
NOTE
Continuing to Toggle the
jOyStICK button upward
in Step 3 will result in
adding successive points
in a rapid sequence and
in random locations. The
remaining steps in this
section will only affect
the most recent cursor
point selected.
NOTE
Continuing to Toggle the
jOyStICK button upward
in Step 3 will result in
adding successive points
in a rapid sequence and
in random locations. The
remaining steps in this
section will only affect
the most recent cursor
point selected.