MikroScan 7600PRO, Руководство оператора

Страница: 140 / 309

Section 5
Images and Image Files
130
MikroScan 7600PRO
Operator’s Manual
Catalog 11180-94
V15.4F 050406
Addtonal changes to the temperature level and senstvty values can
be made at a later tme usng the MkroScan 7600PRO software.
6) Focus the camera. (See Section 4.6 for more information for
Adjusting the Focus of the camera).
7) Press the
SAVe
button.
If the Save Vsble opton has been actvated (see Secton
3.9.2.3 for more nformaton on selectng the Save Vsble
option), the screen will momentarily flash a visible light image
and then a message wll appear at the bottom of the dsplay
ndcatng that the camera s processng the vsble data.
[VISIbLe dAtA PROCeSSInG
MeSSAGe]
If the Voce Memo Recordng opton has been actvated (see
Secton 3.9.2.1 for more nformaton on Selectng the Voce
Memo Recording Option), a message will appear at the bottom
of the dsplay ndcatng that the
jOyStICK [e]
button needs to
be pressed to begn the recordng functon (See Secton 5.1.3
for more nformaton on workng wth Voce Memos).
[VOICe MeMO ReCORdInG MeSSAGe]
To save the mage wthout a voce annotaton memo:
Press the
CAnCeL/VISIbLe [C]
button.
To save the mage wth a voce annotaton memo:
Follow the steps outlined in Section 5.1.3 entitled Adding a Voice
Memo to a New Image.
NOTES
1. When the measuring dis-
tance is more than 1 meter,
the visible camera has the
ability to display the full
screen area of the infrared
image.
2. When the measuring dis-
tance is less than 1 meter,
the visible camera can not
display a part of the infrared
image because of the differ-
ence in the optical axis.
3. The viewing field is ob -
structed by the installation
of the optional telephoto lens
or wide angle lens, therefore
the visible image can not be
displayed the same as the
infrared image.
4. Because the focus distance is
fixed, it can not focus a mea -
suring object within 50cm.
Therefore, when the optional
close-focus lens is installed,
the visible image will not be
displayed correctly.
5. The infrared image and
visible image can not be
displayed simultaneously.
There is approximately a
one-second time difference
between the saving of a ther-
mal image and the saving of
a visible image.
6. The visible image can not
be displayed if the ambient
temperature becomes more
than 45°C during continuous
operation.
NOTES
1. When the measuring dis-
tance is more than 1 meter,
the visible camera has the
ability to display the full
screen area of the infrared
image.
2. When the measuring dis-
tance is less than 1 meter,
the visible camera can not
display a part of the infrared
image because of the differ-
ence in the optical axis.
3. The viewing field is ob -
structed by the installation
of the optional telephoto lens
or wide angle lens, therefore
the visible image can not be
displayed the same as the
infrared image.
4. Because the focus distance is
fixed, it can not focus a mea -
suring object within 50cm.
Therefore, when the optional
close-focus lens is installed,
the visible image will not be
displayed correctly.
5. The infrared image and
visible image can not be
displayed simultaneously.
There is approximately a
one-second time difference
between the saving of a ther-
mal image and the saving of
a visible image.
6. The visible image can not
be displayed if the ambient
temperature becomes more
than 45°C during continuous
operation.