MikroScan 7600PRO, Руководство оператора

Страница: 188 / 309

Section 6
Data Analysis
178
MikroScan 7600PRO
Operator’s Manual
Catalog 11180-94
V15.4F 050406
5) Toggle the
jOyStICK
up or down as needed to move the tempera-
ture point along the vertical plane to the desired location on the
image display.
6) Toggle the
jOyStICK
left or right as needed to move the tempera-
ture point along the horizontal plane to the desired location on the
image display.
P. teMP LAbeL
P. teMP x, y COORdInAteS
P. teMP
POSItIOn [b]
P. teMP
POSItIOn [a]
7) Press the
S [SAVe]
button to establish the temperature point loca-
tion and to once again highlight the new
[P. teMP LAbeL]
.
8) Follow the previous steps 3-7 to add and place additional tempera-
ture points.
P. teMP LAbeL
P. teMP x, y COORdInAteS
P. teMP
POSItIOn [b]
P. teMP
POSItIOn [a]
P. teMP
POSItIOn [c]
The first temperature point was labeled
[a]
. The second tem-
perature pont was labeled
[b]
. Successve ponts wll be labeled
[c]
through
[j]
respectvely.
9) Press the
jOyStICK [e]
button to set the current temperature point
locations and return to the main display.
Pressng
jOyStICK [e]
button wll lock the new temperature
ponts to ther current postons.
TIP
Continuing to Toggle the
jOyStICK
button up,
down, left, or right will al-
low rapid movement of the
cursor.
TIP
Continuing to Toggle the
jOyStICK
button up,
down, left, or right will al-
low rapid movement of the
cursor.