Middle Atlantic Products Premium+ RackLink RLNK-P415 Скачать руководство пользователя страница 196

Страница: 196 / 214

Chapter 4: Using SNMP

196

MIB downloaded from the current firmware of your PDU.

You can download the MIBs from two different pages of the web interface.

MIB download via the SNMP page:

Choose Device Settings > Network Services > SNMP.

Click the Download MIBs title bar.

Select the desired MIB file to download.



RLNK-MIB file for PDU power management.

Click Save to save the file onto your computer.

MIB download via the Device Information page:

Choose Maintenance > Device Information.

In the Information section, click the desired download link:



RLNK-MIB file for PDU power management.

Click Save to save the file onto your computer.

SNMP Gets and Sets

In addition to sending notifications, the PDU is able to receive SNMP get and set requests from third-party SNMP
managers.

•

Get requests are used to retrieve information about the PDU, such as the system location, and the current on a specific
outlet.

•

Set requests are used to configure a subset of the information, such as the SNMP system name.

Note: The SNMP system name is the PDU name. When you change the SNMP system name, the device name shown in
the web interface is also changed.

The PDU does NOT support configuring IPv6-related parameters using the SNMP set requests.

Valid objects for these requests are limited to those found in the SNMP MIB-II System Group and the custom PDU MIB.

The PDU MIB

The SNMP MIB file is required for using your PDU with an SNMP manager. An SNMP MIB file describes the SNMP
functions.

Содержание Premium+ RackLink RLNK-P415























































































































































































































Результаты поиска

Содержание Premium+ RackLink RLNK-P415

Отзывы:

Middle Atlantic Products Premium+ RackLink RLNK-P415, Руководство пользователя, Страница: 196 / 214

Результаты поиска

Содержание Premium+ RackLink RLNK-P415

Отзывы: