Chapter 3: Using the Web Interface
140
10.
To remove any sensor from the Report Sensors list box, select it and click
. To make multiple
selections, press Ctrl+click or Shift+click to highlight multiple ones.
11.
To immediately send out the sensor report, click Send Report Now.
Tip: When intending to send a sensor report using custom messages, use the placeholder [SENSORREPORT] to report
sensor readings. See Email and SMS Message Placeholders (on page 149).
12.
Click Create.
Send SMS Message
You can configure SMS messages to be sent when an event occurs and can customize the message.
Messages consist of a combination of free text and PDU placeholders. The placeholders represent information which is
pulled from the PDU and inserted into the message.
Note: The PDU cannot receive SMS messages.
For example:
[USERNAME] logged into the device on [TIMESTAMP]
translates to
JQPublic logged into the device on 2012-January-30 21:00
For a list and definition of available variables, see
Email and SMS Message Placeholders
To create a send SMS message action:
1.
Choose Device Settings > Event Rules >
.
2.
Select "Send SMS message" from the Action list.
3.
In the Recipient Phone Number field, specify the phone number of the recipient.
