![background image](http://html1.mh-extra.com/html/middle-atlantic-products/premium-racklink-rlnk-p415/premium-racklink-rlnk-p415_user-manual_1790330190.webp)
Chapter 3: Using the Web Interface
190
Note: The "below lower warning" and "below lower critical" states also show yellow and red colors respectively. However, it
is not meaningful to enable these two thresholds for current levels.
Inlet Sensors
To view inlet sensor information:
1.
Choose Inlet.
The Inlet page appears.
2.
View inlet sensor information as follows:
If desired, you can sort the list by clicking the desired column header. See
(on page 27).
3.
Sensor name, value, and state information is shown.
Inlet Settings
You can edit the Label, Name, and reset active energy settings, if desired.
To customize the inlet's name:
1.
Choose Inlet.
The Inlet page appears.
2.
Click the Settings title bar as shown.
3.
Click Edit Settings.