MD Helicopters 369-500, Инструкция по техническому обслуживанию

Страница: 203 / 722

CSP-HMI-3
MD Helicopters, Inc
.
MAINTENANCE MANUAL
[ Main Menu ]
[ HMI − 3 Book TOC ]
[ Chapter 95 TOC ]
95-30-00
Page 409
Revision 14
The information disclosed herein is proprietary to MD Helicopters, Inc.
Neither this document nor any part hereof may be reproduced or transferred to
other documents or used or disclosed to others for manufacturing or any other
purpose except as specifically authorized in writing by MD Helicopters, Inc.
Copyright
©
1999 − 2016 by MD Helicopters, Inc.
G95-3004-1A
CHAFING TAPE OR PLASTIC
EDGING GROMMET
CLAMPING
(TYP)
PLENUM CHAMBER PAN
ENGINE
(TYP)
O-RING
REDUCER
TORQUE
PRESSURE
O-RING
TYPICAL TORQUE OR
OIL PRESSURE GAGE
FITTING
INSTRUMENT
PANEL
ALUMINUM ALLOY OR
CORROSION RESISTANT
STEEL TUBE (NOTE 3)
O-RING
ADAPTER
NYLON TUBE
(NOTE 3)
TORQUE GAGE LINE
(NOTE 2)
NYLON TUBE
(NOTE 3)
UNION AND NUT
TEE
TORQUE PRESSURE GAGE
WITH BLEED PROVISION
BLEED VALVE
(NOTE 4)
0.250 IN. (6.35 MM)
BLEED HOSE
GROMMET
OIL PRESSURE LINE
(NOTE 1)
NYLON TUBE
(NOTE 3)
CANOPY FRAME
STATIC PRESSURE
NYLON TUBE
ENGINE OIL PRESSURE LINE
(NOTE 1)
TORQUE GAGE
PRESSURE LINE
NYLON STRAP
TYING
(TYP)
NOTES:
1. ENGINE OIL PRESSURE LINE USED
WITH DIRECT READING TYPE GAGE.
2. SINGLE CONTINUOUS NYLON LINE WITH GROMMET
AS SHOWN FOR OIL PRESSURE LINE (SEE NOTE 3).
3. AT REPLACEMENT, SINGLE CONTINUOUS 0.1875 IN.
(4.7625 MM) OD LINE IS TO BE USED.
4. AT INSTALLATION, VALVE THREADS ARE WRAPPED
WITH TEFLON TAPE.
5. WRAP TUBE AT LEAST ONCE WITH 2 IN. (5.08 MM) WIDE
DUCT TAPE APPROXIMATELY 1 IN. (2.54 CM) FROM FITTING.
6. SLIDE HITCH DOWN TUBE UNTIL IT RESTS ON DUCT TAPE.
7. TORQUE TO 10 - 15 INCH-POUNDS (1.13 - 1.69 NM)
(THIS TUBE ONLY).
OIL
PRESSURE
Figure 404. Torque and Engine Oil Pressure Indicating System (Sheet 1 of 2)