MD Helicopters 369-500, Инструкция по техническому обслуживанию

Страница: 620 / 722

CSP-HMI-3
MD Helicopters, Inc
.
MAINTENANCE MANUAL
[ Main Menu ]
[ HMI − 3 Book TOC ]
[ Chapter 97 TOC ]
Page 4
Revision 12
97-01-00
The information disclosed herein is proprietary to MD Helicopters, Inc.
Neither this document nor any part hereof may be reproduced or transferred to
other documents or used or disclosed to others for manufacturing or any other
purpose except as specifically authorized in writing by MD Helicopters, Inc.
Copyright
©
1999 − 2016 by MD Helicopters, Inc.
G97-0101-2
MODEL H10-56
HAS COIL CORD (EXTENDS TO 5 FT.) WITH U-174/U PLUG
MODEL H10-76
LOW IMPEDANCE HEADSET
FOR USE WITH LOW IMPEDANCE RADIOS. HAS M-87
DYNAMIC MICROPHONE (5 OHMS) WITH COIL CORD
(EXTENDS TO 5 FT.) AND U-174/U PLUG.
LOCKNUT CONSTRUCTION
FOR CUSTOMIZED FIT.
SET IT ONCE, IT FITS YOU
RIGHT EVERY TIME.
EARPHONES (300 OHMS
EACH) WIRED IN PARALLEL
FOR SAFETY AND
RELIABILITY. EARPHONES
COMPATIBLE WITH
150-1000 OHMS SYSTEM
EXTRA THICK VENTILATED
CUSHION HEADPAD FOR
MAXIMUM COMFORT
CORROSION PROOF CHROME
PLATED STEEL IN ACCORDANCE
WITH DEMANDING GOVERNMENT
SPECIFICATIONS
STIRRUP PIVOT ASSEMBLY GIVES
EAR CUPS UNIVERSAL FIT
CORD AND PLUG
CONFIGURATIONS FOR
SPECIFIC AIRCRAFT
SOFT FOAM FILLED
POLYURETHANE EAR
SEALS FOR
EXCEPTIONAL
COMFORT AND
MAXIMUM
ATTENUATION
LISTEN VOLUME
CONTROL ALLOWS YOU
TO ADJUST TO A
COMFORTABLE LEVEL
HIGH PERFORMANCE
NOISE CANCELING
MICROPHONES
SPRING TENSION BOOM
ASSEMBLY FOR PRECISE
MICROPHONE PLACEMENT
UNIVERSAL BOOM ALLOWS
MICROPHONE TO BE PLACED
ON THE LEFT OR RIGHT SIDE
OF MOUTH
Figure 1. Headset − Microphones (Sheet 2 of 2)