MD Helicopters 369-500, Инструкция по техническому обслуживанию

Страница: 47 / 722

CSP-HMI-3
MD Helicopters, Inc
.
MAINTENANCE MANUAL
[ Main Menu ]
[ HMI − 3 Book TOC ]
[ Chapter 95 TOC ]
95-00-00
Page 109
Revision 11
The information disclosed herein is proprietary to MD Helicopters, Inc.
Neither this document nor any part hereof may be reproduced or transferred to
other documents or used or disclosed to others for manufacturing or any other
purpose except as specifically authorized in writing by MD Helicopters, Inc.
Copyright
©
1999 − 2016 by MD Helicopters, Inc.
Table 103. Instrument Troubleshooting (Cont.)
TOT Indicator
Indicator fails to operate. No
readings or intermittent readings.
Defective indicator Remove and replace indicator.
Loose wiring, disconnected
connector or defective ground
terminal
Check continuity through wiring and
connector. Repair as necessary.
Analog/Digital TOT Indicator
Indicator fails to operate. No
readings or intermittent readings
Defective indicator Remove and replace indicator.
Loose wiring, disconnected
connector or defective ground
terminal
Check continuity through wiring and
connector. Repair as necessary.
Engine Oil Temperature/Oil Pressure Indicator
Pressure indicator fails to
operate. No readings or
intermittent readings
Defective indicator Remove and replace indicator.
Loose wiring, disconnected
connector or defective ground
terminal
Check continuity through wiring and
connector. Repair as necessary.
No out put from oil pressure
transducer
Defective transducer Remove and replace transducer.
Oil temperature fails to operated.
No reading or intermittent reading
Open circuit in oil temperature bulb Remove and replace oil temperature
bulb.
Defective wiring Repair as necessary.