▋
▋
JR▋DLG1
Thank you for purchasing this JR product. The JR Discus Launch Glider (DLG) 'Air Flow' is the first in our JR glider series.
This model is the first 'plug and fly' (PNF) DLG on the market. High quality JR servos (DS319HV) are already installed,
and servo linkages are already in place. Only a few simple steps are required before the model can be flown and enjoyed.
JAPAN REMOTE CONTROL Co., Ltd
▋
▋
CAUTION
The Air Flow has been designed and manufactured with high performance as the first priority. The wing and fuselage
are molded from lightweight FRP using as little resin as possible. Occasionally there will be some slight surface
defects in the resin - this will not affect flight performance, and is an indication of the lightest structure possible.
When storing and transporting your Air Flow, please avoid areas of high temperature and humidity, and avoid
pressure on the wing or fuselage.
Even a commercial stand may allow the fuselage to deform - so please pay attention to this.
NEM-B72A
Assembly manual
To become familiar with your Air Flow
DLG, please read this manual throughly
before assembly. Then continue to refer to
this manual during the assembly process.
JR's Medium Size Discus Launch Glider
