ME6 IR Dome Configuration Guide
75
2 Click a schedule in the panel.
The schedule is highlighted.
3 Select the check boxes corresponding to the days of the week when the schedule is
active.
4 Select your configuration:
•
Select
Day
to apply the schedule only when the camera is in
Day
mode.
•
Select
Night
to apply the schedule only when the camera is in
Night
mode.
Note:
For more information about configuring day-night transitions, see
“Configuring the Camera’s Sensor” on page 59.
•
Select
Time
to manually enter the schedule
Start
time and
Duration
.
5 Click
Save
to save and apply changes.
6 Repeat steps 2-5 to configure additional schedules.
Note:
If two schedules overlap (for example:
Schedule 1
is configured from 8AM to
8PM, while
Schedule 2 is configured
from 7PM to 8AM) the Web Setup always applies
the schedule with a higher priority. The priority is based in descending order
(
Schedule 1
has the highest priority, while
Schedule 10
has the lowest priority).
