Manitowoc 140.5.204 Скачать руководство пользователя страница 663

Страница: 663 / 669

Data

Value Unit

Safety distance between the load hook

and pulley head

3.3 ft

Chapter 9.6.3 “Moving the machine onto the transport vehicle”

on page 620

9.7.4 Lifting the machine off the transport vehicle

Falling machine or accessories from incorrect lifting
–

Only use the suspension gear provided with the machine.

–

Ensure that the sling gear has sufficient load-bearing

capacity and is not damaged.

–

Only attach the machine and all accessory parts at the

defined lifting points.

If the machine or accessories are lifted incorrectly, the load

could fall. This can cause serious injury.

Risk of injury from falling.
–

Use a suitable stable ladder to access the lifting points at

the uppercarriage.

–

Position the ladder on level ground.

–

Always face the machine when climbing onto and down

from the machine.

–

Always make sure you have at least three points of con-

tact with the ladder and grip handles when climbing up or

down. Two hands and one foot, or two feet and one hand

must remain in contact with the ladder steps and the grip

handles at all times.

Steps and walkway gratings are folded in or dismounted for

transport. Therefore, when attaching the machine to the lifting

points, there is an increased risk of falling and sustaining inju-

ries.

Chapter 9.6.4 “Lifting the machine onto the transport vehicle”

on page 621

Further notes

DANGER

WARNING

Further notes

Transport

27.04.2020

140.5.204 Telescopic crane

663

Reference

Only

Содержание 140.5.204






























































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 140.5.204

Отзывы:

Бренды по названию

Популярные бренды

Manitowoc 140.5.204, Руководство по эксплуатации

Результаты поиска

Содержание 140.5.204

Отзывы:

Бренды по названию

Популярные бренды