Manitowoc 140.5.204 Скачать руководство пользователя страница 421

Страница: 421 / 669

Pull the lever backward.

Push the cab door forward until it locks into place.

7.6.3 Adjusting the driver seat

Damage to health due to improperly adjusted driver seat!
–

Adjust the driver seat before starting up the machine or

when switching operators.

An improperly adjusted driver seat compromises the opera-

tor's sitting position and comfort. This can result in adverse

health effects.

The driver seat must be adjusted so that the operator can

always reach the pedals even when the road surface is poor.

Do not adjust the driver seat when in drive or work mode.

Always only adjust one function at a time.

Do not use the driver seat as a climbing aid.

Do not place any objects on the driver seat.

Do not cover the driver seat.

The machine is equipped with an air-suspended driver seat that

can be adjusted to the operator's individual requirements.

Closing the cab door from the

inside

Safety instructions

CAUTION

Operation

27.04.2020

140.5.204 Telescopic crane

421

Reference

Only

Содержание 140.5.204






























































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 140.5.204

Отзывы:

Бренды по названию

Популярные бренды

Manitowoc 140.5.204, Руководство по эксплуатации

Результаты поиска

Содержание 140.5.204

Отзывы:

Бренды по названию

Популярные бренды