Manitowoc 140.5.204 Скачать руководство пользователя страница 503

Страница: 503 / 669

Tilt the joystick

The rope on winch 2 is wound up.

The hook is raised.

Tilt the joystick

The rope on winch 2 is unwound.

The hook is lowered.

7.15.5

Limiting the operating range

Risk of death when exceeding configured work area.
Rapid machine movements when using a configured working

range may cause the machine to exceed this range. This can

cause death or serious injury. The machine or nearby struc-

tures may be damaged.

–

Keep an extra safe distance from persons, machinery and

structures near the configured work area.

–

Move the machine slowly and carefully.

Risk of damage to machine and surroundings from failure to

observe limits!
If the outermost point of the machine exceeds the configured

limit value, the machine may collide with objects in the work

area. This can cause serious property damage.

–

Always base the height limit on the highest point (1).

–

Before starting work, make sure the configured limit value

ensures enough space from the obstacle.

Lift winch 2

Lower winch 2

Safety instructions

WARNING

NOTICE

Operation

27.04.2020

140.5.204 Telescopic crane

503

Reference

Only

Содержание 140.5.204






























































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 140.5.204

Отзывы:

Бренды по названию

Популярные бренды

Manitowoc 140.5.204, Руководство по эксплуатации

Результаты поиска

Содержание 140.5.204

Отзывы:

Бренды по названию

Популярные бренды