Manitowoc 140.5.204 Скачать руководство пользователя страница 573

Страница: 573 / 669

Suitable tools, such as wooden beams

Suitable auxiliary vehicle attachment, such as a lifting fork

Area for positioning using the appropriate attachment

Use suitable tools to protect the pulley head from damage.

Centrally position the auxiliary vehicle attachment at the

specified point on the pulley head.

Carefully insert the telescopic thruster as far as it will go.

Attach the source of force for positioning using the auxil-

iary vehicle in the direction of the boom.

The telescopic thruster must not tilt while it is being

inserted.

7.20.2.7.7

Pushing back the remaining telescopic thrusters

Attach the hoisting slings to the telescopic thruster.

Pull out the telescopic thruster for emergency release.

Unlock the telescopic thruster with the appropriate emer-

gency release screw.

Push back the telescopic thruster which has been released in

an emergency.

Push back the remaining telescopic thrusters in the same

way.

All telescopic thrusters are fully inserted.

7.20.2.7.8

Dismantling the telescopic thruster

The telescopic thrusters are dismantled by the service technician.

Contact the service technician.

Operation

27.04.2020

140.5.204 Telescopic crane

573

Reference

Only

Содержание 140.5.204






























































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 140.5.204

Отзывы:

Бренды по названию

Популярные бренды

Manitowoc 140.5.204, Руководство по эксплуатации

Результаты поиска

Содержание 140.5.204

Отзывы:

Бренды по названию

Популярные бренды