Manitowoc 140.5.204 Скачать руководство пользователя страница 513

Страница: 513 / 669

Safety lever engaged

Safety lever pushed in direction of

travel

All hydraulic functions are unavailable.

Work movements cannot be performed.

The slewing gear brake is engaged.

All hydraulic functions are available.

All work movements can be performed.

7.17.2

Switch off engine

Risk of diesel engine and cooling system damage due to skip-

ping cool-down.
–

Let the engine cool down before shutting it off.

Switching off the engine without allowing to cool down first

can cause heat accumulation and overheating of engine parts.

Failure to follow these instructions can cause increased wear

to the engine and cooling system.

Consumers may keep running when the ignition is shut off.

Some consumers may keep running after the ignition has been

shut off. They are switched off automatically after a short period of

time.

If the machine is switched off you must wait for at least 15 seconds

before a restart.

The

[Engine start]

is used to switch the engine off temporarily

during operation, e.g. when pausing work.

Requirement:

The safety lever has been pulled back.

Press the

[Engine start]

button to the right for 2 seconds.

The engine is off.

The ignition is on.

The SENCON is ready for operation.

Press button on the right (at least 2

seconds)

Press button on the right (at least 2

seconds)

The engine is started.

The engine is stopped.

Safety lever

Safety instructions

NOTICE

Switching off the engine with the

[Engine start]

button

Engine start

Operation

27.04.2020

140.5.204 Telescopic crane

513

Reference

Only

Содержание 140.5.204






























































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 140.5.204

Отзывы:

Бренды по названию

Популярные бренды

Manitowoc 140.5.204, Руководство по эксплуатации

Результаты поиска

Содержание 140.5.204

Отзывы:

Бренды по названию

Популярные бренды