Manitowoc 140.5.204 Скачать руководство пользователя страница 100

Страница: 100 / 669

Fall arrest safety harness

The fall arrest safety harness

reduces the danger of injury

when falling from a great

height.

At working heights above

2.00 m, using a safety harness

is recommended. At working

heights above 3.00 m, using a

safety harness is a legal

requirement.

Hook-in points are marked by

the appropriate sign.

Ear protection

Hearing protection protects

against hearing loss due to

noise.

Protective goggles

Safety goggles protect eyes

against flying parts and

splashing.

Protective gloves

Protective gloves protect the

hands against friction, abra-

sions, punctures, deep wounds,

and hot surfaces.

Hard hat

Hard hats protect the head

against falling objects, swinging

loads and collisions with fixed

objects.

Safety shoes

Safety shoes protect feet

against crushing, falling parts

and slipping on slippery sur-

faces.

Protective clothing

Protective clothing is tight-fit-

ting, tear-resistant clothing with

tight sleeves and no protruding

parts. Protective clothing pre-

vents persons from being

pulled into moving machine

parts.

Safety instructions

27.04.2020

140.5.204 Telescopic crane

100

Reference

Only

Содержание 140.5.204






























































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 140.5.204

Отзывы:

Бренды по названию

Популярные бренды

Manitowoc 140.5.204, Руководство по эксплуатации

Результаты поиска

Содержание 140.5.204

Отзывы:

Бренды по названию

Популярные бренды