Manitowoc 140.5.204 Скачать руководство пользователя страница 305

Страница: 305 / 669

Route the hoisting rope through the rope conduit of the lifting

limit switch bracket.

Mount the side brackets of the lifting limit switch bracket.

6.6.9 Ballasting the machine

Falling machine or accessories from incorrect lifting
–

Ensure that the sling gear has sufficient load-bearing

capacity and is not damaged.

–

Only attach the machine and all accessory parts at the

defined lifting points.

If the machine or accessories are lifted incorrectly, the load

could fall. This can cause serious injury.

Risk of injury due to improperly placed ballast blocks.
When slewing the uppercarriage, ballast blocks that are not

placed correctly on top of each other strike obstructions or

persons. Persons will be injured and material damage occurs.

–

Make sure all ballast blocks are seated properly.

–

Check that the ballast blocks are secured in the correct

position and are firmly in place.

Danger of accident by locking bolts coming loose!
–

Secure the locking bolt with an additional mechanical

locking mechanism.

–

Perform a daily visual inspection of the locking mecha-

nism and locking bolts.

Locking bolts may become loose when the system is de-ener-

gized. The counterweight is no longer bolted to the uppercar-

riage and may fall down. This can result in the machine over-

turning. This can cause serious injury.

Eye contact between crane operator and banksman must be

ensured.

The machine must only be equipped with ballast when it is

placed on the ground.

Ballast must only be applied with the machine set to the max-

imum track width.

Ensure all personnel is outside the danger zone during the bal-

lasting procedure.

Do not stand on or under the counterweight.

DANGER

WARNING

Start-up and setup

27.04.2020

140.5.204 Telescopic crane

305

Reference

Only

Содержание 140.5.204






























































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 140.5.204

Отзывы:

Бренды по названию

Популярные бренды

Manitowoc 140.5.204, Руководство по эксплуатации

Результаты поиска

Содержание 140.5.204

Отзывы:

Бренды по названию

Популярные бренды