Manitowoc 140.5.204 Скачать руководство пользователя страница 640

Страница: 640 / 669

Data

Value Unit

C: Lifting height for mounting/removing

the track wheel carriers

700 mm

C: Lifting height for mounting/removing

the track wheel carriers

27.6 in

C: Maximum lifting height for

unloading from/loading onto the trans-

port vehicle

953 mm

C: Maximum lifting height for

unloading from/loading onto the trans-

port vehicle

37.5 in

Lift the boom to at least 30°.

Retract the boom fully.

Lift the machine to the maximum lifting height.

The following combinations are available for supporting or lowering

the machine:

Simultaneously extending or retracting the rear left and rear

right outrigger cylinders as well as the front right and front left

outrigger cylinders piece by piece
or

Simultaneously extending or retracting the rear left and front

left outrigger cylinders as well as the rear right and front right

outrigger cylinders piece by piece
or

Extending or retracting the individual outrigger cylinders piece

by piece

The process for supporting the machine is described using exam-

ples of possible outrigger cylinder combinations. The same steps

must be used to lift the machine with the respective outrigger cyl-

inder control.

Take note of the color markings on the outrigger cylinders and on

the setup remote radio control.

Tilt and hold downward the

[Extend/retract rear left outrigger cylinder]

and the

[Extend/retract front left outrigger cylinder]

levers at the same

time until the outrigger cylinders are a little retracted.

Tilt and hold downward the

[Extend/retract rear right outrigger cylinder]

and the

[Extend/retract front right outrigger cylinder]

levers at the

same time until the right outrigger cylinders are at the same

height as the left outrigger cylinders.

Lifting the machine to the max-

imum lifting height

Specifications for lifting or low-

ering the machine

Transport

27.04.2020

140.5.204 Telescopic crane

640

Reference

Only

Содержание 140.5.204






























































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 140.5.204

Отзывы:

Бренды по названию

Популярные бренды

Manitowoc 140.5.204, Руководство по эксплуатации

Результаты поиска

Содержание 140.5.204

Отзывы:

Бренды по названию

Популярные бренды