Manitowoc 140.5.204 Скачать руководство пользователя страница 15

Страница: 15 / 669

2.2.2 Foreseeable misuse

These uses are classed as misuses:

Use of work tools not authorized by the manufacturer.

Exceeding the permitted safe load capacity. The weight of the

work tool is part of the load capacity.

Operation of the machine in environmental conditions that are

not permitted according to the technical data.

For the application of insufficient protective machine equip-

ment.

Non-compliance with the pre-heating and warm-up phase.

Non-compliance with the permissible total weight of the

machine with work tools.

Modifications or alterations to the machine.
This applies also for the installation and use of safety devices

and valves, as well as for welding on load bearing parts.

Not using original spare parts from the manufacturer.

Pulling jammed loads free.

Lifting loads at an angle.

The attached load and work tool bumping into obstacles.

Operating the machine on insufficiently stable, firm ground.

Misuse by untrained and uninstructed personnel.

Failure to perform the necessary inspection and maintenance

tasks.

Lifting, moving, and transport of persons.

Operation in an explosive environment.

2.3 Limitation of liability

Misuse of the machine and its operating tools can lead to uncon-

trolled machine behavior and accidents. As a result, people can be

killed or seriously injured. Misuse excludes all liability on the part of

the manufacturer. The risk is borne solely by the operator.

2.4 Dangers

There are risks of crushing, shearing and contact around the

machine. Danger zones must be secured, e.g. through signaling or

shutoff.

Improper operation causes multiple dangers. Hazardous situations

must be avoided by careful training of the users.

Limitation of liability on the part of

the manufacturer

Safety precautions

Product description

27.04.2020

140.5.204 Telescopic crane

Reference

Only

Содержание 140.5.204






























































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 140.5.204

Отзывы:

Бренды по названию

Популярные бренды

Manitowoc 140.5.204, Руководство по эксплуатации

Результаты поиска

Содержание 140.5.204

Отзывы:

Бренды по названию

Популярные бренды