Manitowoc 140.5.204 Скачать руководство пользователя страница 405

Страница: 405 / 669

Lower the counterweight with the ballasting cylinders to the

ground.

10.

Disable the remote radio control.

11.

Remove the ballasting cylinder chains from the lifting points

on the ballast bracket. Link the chains together. Extend the

ballasting cylinders.

The chain hooks are at the same height as the slewing

ring.

12.

Disable the ballasting mode.

13.

Move the machine away from the counterweight.

14.

Remove the safety chains.

15.

Rest the ballast blocks and the ballast bracket one at a time

onto the transport vehicle or on a suitable support on the

ground.

16.

Push in the locking lever.

17.

Fully extend the ballasting cylinders.

Chapter 6.6.9 “Ballasting the machine” on page 305

6.7.8 Partially ballasting the machine

Requirement:

The maximum track width is set.

The suspension gear is mounted onto the hook.

The counterweight is removed from the uppercarriage.

Park the machine parallel to the counterweight.

Set the extension mode and boom length.

Release all the securing chains on the counterweight.

Set the

Setup ballast

setup mode using the

[Setup ballast]

quick-select button.

Attach the top ballast block to the lifting points.

The suspension gear must not be twisted and must be the

same length on both sides.

Lift the ballast block off the counterweight.

Rest the ballast block on the transport vehicle or on a suit-

able support on the ground.

Repeat these steps to remove the ballast blocks that are not

required for partial ballasting from the counterweight.

Activate the ballasting mode.

Secure the counterweight for partial ballasting with the safety

chains.

Further notes

Start-up and setup

27.04.2020

140.5.204 Telescopic crane

405

Reference

Only

Содержание 140.5.204






























































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 140.5.204

Отзывы:

Бренды по названию

Популярные бренды

Manitowoc 140.5.204, Руководство по эксплуатации

Результаты поиска

Содержание 140.5.204

Отзывы:

Бренды по названию

Популярные бренды