Manitowoc 140.5.204 Скачать руководство пользователя страница 462

Страница: 462 / 669

7.13 Moving the machine

Risk of electric shocks and burns when working near live

cables!
–

Keep a sufficient distance from overhead power lines and

other live cables.

If machine components come into direct contact with the

cable, there is a risk of an electric shock that could seriously

or fatally injure the machine operator. When working near

cables carrying hazardous voltage, an electric arc could

develop between the machine and the cable. The electric

voltage could injure the machine operator.

Danger of crushing and impact from loss of stability
–

Check to make sure that the ground has sufficient load-

bearing capacity before use.
Always wear safety belts or safety gear.

When driving on unsuitable ground, the machine may become

unstable and injure the machine operator.

Risk of injury due to restricted view when reversing!
–

The mirrors enable you to monitor the work area.

–

Use the reversing camera to monitor the work area.

–

Observe the reversing alarm.

In certain situations, the driving area cannot be seen while

reversing.

Machine is tilting on unsustainable surface!
–

Before starting work, check the surface for strength and

load-bearing capacity.

–

Keep the maximum allowable ground pressure.

People can be crushed by the falling machine.

Risk of damage to crawler tracks and running gear compo-

nents due to driving over elevations and depressions!
–

Only drive on level, smooth routes and roads without ele-

vated or recessed obstacles.

–

Observe the max. ground pressure.

When traveling over elevated or recessed obstacles such as

railroad tracks, crawler tracks and running gear components

can be damaged.

DANGER

WARNING

NOTICE

Operation

27.04.2020

140.5.204 Telescopic crane

462

Reference

Only

Содержание 140.5.204






























































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 140.5.204

Отзывы:

Бренды по названию

Популярные бренды

Manitowoc 140.5.204, Руководство по эксплуатации

Результаты поиска

Содержание 140.5.204

Отзывы:

Бренды по названию

Популярные бренды