Manitowoc 140.5.204 Скачать руководство пользователя страница 474

Страница: 474 / 669

Risk of accident from starting in the wrong direction
–

Before moving off, ascertain the direction of travel, the

direction of steering, and the uppercarriage position and

move the machine accordingly.

–

Drive slowly and carefully.

Setting the uppercarriage position to 180° inverts the direction

of travel and the direction of steering. If the machine is incor-

rectly moved against the expected direction of travel, this can

lead to accidents. This can cause injury to persons.

Push the

[Release travel mode ]

switch to the right.

Set the desired travel mode via the

[Drive fast - slow]

switch.

Depress the pedals or tilt the levers to move the machine as

desired.

7.13.4

Stopping the machine

Release both drive pedals.

release both hand levers.

The machine stops.

7.13.5

Overview: Control elements for moving the machine

The most important operating and display elements for carrying out

the described instructions are:

Switch position left

Switch position right

The machine cannot be moved.

The machine can be moved.

Switch position left

Switch position right

Lower speed and higher tractive force are

set.

More sensitive driving is possible.

Higher speed and lower tractive force are

set.

WARNING

Overview

Activate drive mode

Drive slow - fast

Operation

27.04.2020

140.5.204 Telescopic crane

474

Reference

Only

Содержание 140.5.204






























































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 140.5.204

Отзывы:

Бренды по названию

Популярные бренды

Manitowoc 140.5.204, Руководство по эксплуатации

Результаты поиска

Содержание 140.5.204

Отзывы:

Бренды по названию

Популярные бренды