Manitowoc 140.5.204 Скачать руководство пользователя страница 62

Страница: 62 / 669

Only work on and with the machine on a solid, level substrate with

sufficient soil strength. It is important to comply with the specified

ground pressure. Position the machine on level ground with suffi-

cient load bearing capacity and use suitable outrigger pads to sta-

bilize the machine.

3.3 Danger zones

3.3.1 Zones with stringent safety requirements

Zones with stringent safety requirements are the areas in which

persons can be injured by the machine, or its tools, attachments, or

loads. The danger zone shifts with the travel movements.

The following are the main areas with stringent safety require-

ments:

Areas in which persons can be struck by the slewing motions

of the machine.

Areas in which persons can be injured by the machine moving,

rolling or tipping over.

Ares in which persons can be injured by loads swinging out or

falling.

Areas in which persons can be crushed between the machine

and objects such as buildings and scaffolding.

Areas in which persons can fall from the machine.

Areas in which persons can be injured by hot or pressurized

substances.

Areas with hot surfaces.

Make sure no one is in the danger zone.

Keep a safe distance from the danger zone.

Machine operator: Give warning signals if there is danger for

persons.
–

Shut down the machine if persons do not leave the danger

zone despite this warning.

Make sure that only the machine operator is in the cab of the

machine while it is in operation.

If the machine operator's view is restricted while driving and

working, a banksman should be used. The communication

between the banksman and the machine operator must be

ensured.

Ground condition

Measures

Safety instructions

27.04.2020

140.5.204 Telescopic crane

Reference

Only

Содержание 140.5.204






























































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 140.5.204

Отзывы:

Бренды по названию

Популярные бренды

Manitowoc 140.5.204, Руководство по эксплуатации

Результаты поиска

Содержание 140.5.204

Отзывы:

Бренды по названию

Популярные бренды