Manitowoc 140.5.204 Скачать руководство пользователя страница 447

Страница: 447 / 669

The valid operation parameters for the setup status have been

set on the SENCON.

The safety lever is pushed forward.

Press the

[Tilt cab]

switch to the left and keep it pressed.

Requirement:

The engine is switched on.

The SENCON is ready for operation.

The valid operation parameters for the setup status have been

set on the SENCON.

The safety lever is pushed forward.

Press the

[Tilt cab]

switch to the right and keep it pressed.

Switch position left

Switch position Center

Switch position right

The cab incline increases.

The cab does not move

The cab incline decreases.

7.12 Moving the uppercarriage

Risk of death due to moving parts in the work area of the

machine.
–

Ensure that no one is in the work area during the

machines operation.

–

In case if danger, give warning signals for people.

–

Stop all work immediately if unauthorized persons are in

the danger zone.

Persons in the work area of the machine will be caught and

injured by moving machine parts.

Risk of damage to machine when slewing and stopping the

uppercarriage suddenly.
–

Stop uppercarriage slewing slowly.

–

Slowly begin uppercarriage slewing from a standstill.

–

Slew the uppercarriage gradually.

Slewing or stopping the uppercarriage suddenly places

severe mechanical stress on the machine, which can result in

damage.

Decreasing the cab tilt

Tilting the cab

Safety instructions

WARNING

NOTICE

Operation

27.04.2020

140.5.204 Telescopic crane

447

Reference

Only

Содержание 140.5.204






























































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 140.5.204

Отзывы:

Бренды по названию

Популярные бренды

Manitowoc 140.5.204, Руководство по эксплуатации

Результаты поиска

Содержание 140.5.204

Отзывы:

Бренды по названию

Популярные бренды