Manitowoc 140.5.204 Скачать руководство пользователя страница 498

Страница: 498 / 669

The effect of wind loads on the crane and panel shall be taken

into consideration. Operations shall be halted if the wind can

cause a loss of control in handling the load.

The main hoist line shall be used to raise the panel into the

vertical position.

Ensure that all personnel working on and around the crane are

properly trained and thoroughly familiar with operational functions

of the crane and safe operating and work practices. Personnel

should be thoroughly familiar with regulations and standards gov-

erning cranes and their operation. Work practices may vary slightly

between government regulations, industry standards, local and job-

site rules and employer policies so a thorough knowledge of and

compliance with all relevant work rules is necessary.

Chapter 2.6.1.8 “Winch” on page 22

Machine operator

Slinger

7.15.4.4.1

Setting the operating mode

Symbol for

operating

parameters

Value to be

applied

All selectable

values

<=0.1 m/s

All selectable

values

0 t

All selectable

values

Winch 1: 01

Winch 2: 02

Requirement:

Winch 1 is single-reeved.

Winch 2 is double-reeved.

The

[Activate winch 1]

switch is in the right switch position.

The

[Activate winch 2]

switch is in the left switch position.

The extension mode is set for the application at hand.

Push the

[Activate winch 2]

switch to the right.

Winch 2 is activated.

Confirm the setup status.

Set the operating parameters.

Push the

[Tilt-Up Panel Lifting]

quick-select button.

The status indicator of the quick-select icon lights up

yellow.

Confirm the setup status.

Further notes

Personnel

Operation parameters to be set for

Tilt-Up Panel Lifting

Operation

27.04.2020

140.5.204 Telescopic crane

498

Reference

Only

Содержание 140.5.204






























































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 140.5.204

Отзывы:

Бренды по названию

Популярные бренды

Manitowoc 140.5.204, Руководство по эксплуатации

Результаты поиска

Содержание 140.5.204

Отзывы:

Бренды по названию

Популярные бренды