Manitowoc 140.5.204 Скачать руководство пользователя страница 496

Страница: 496 / 669

The extension mode is set for the application at hand.

The operation parameters for the current setup status of the

machine are set on the SENCON.

With two reeved hooks:
–

The winch reeving is set for both winches according to the

specifications.

–

Attach the load to the hook for which the reeving is higher

than

[0]

on the SENCON.

Tilt the joystick for lifting or lowering the hook in the appro-

priate direction.

With two reeved hooks, track the unloaded hook. Tilt the joy-

stick for lifting or lowering the unloaded hook in the appro-

priate direction.

Tilt the joystick

The rope on winch 1 is unwound.

The hook is lowered.

Tilt the joystick

The rope on winch 1 is wound up.

The hook is raised.

Tilt the joystick

The rope on winch 2 is wound up.

The hook is raised.

Lower winch 1

Lift winch 1

Lift winch 2

Operation

27.04.2020

140.5.204 Telescopic crane

496

Reference

Only

Содержание 140.5.204






























































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 140.5.204

Отзывы:

Бренды по названию

Популярные бренды

Manitowoc 140.5.204, Руководство по эксплуатации

Результаты поиска

Содержание 140.5.204

Отзывы:

Бренды по названию

Популярные бренды