Manitowoc 140.5.204 Скачать руководство пользователя страница 271

Страница: 271 / 669

Data

Value Unit

Maximum pressure exerted by each

outrigger pad

214.8 psi

If the load-bearing capacity of the ground is insufficient, a suitable

support must also be used to reduce the ground pressure.

Supporting the machine to change the track width is necessary

when:

The machine is equipped with ballast.

The machine is unballasted and on ground with insufficient

load-bearing capacity.

6.6.7.3.1 Activating ballasting mode

Open the

“Setup”

menu page on the SENCON.

Press the

[Ballasting mode]

quick-select button.

The status indicator of the quick-select icon lights up

yellow.

The engine is switched off.

The Setup remote radio control is used to control the

machine during setup.

Yellow bar

Black bar

The ballasting mode is activated.

The Setup remote radio control is used to con-

trol the machine during certain setup proce-

dures.

The ballasting mode is deactivated.

The machine is controlled using the controls in

the cab.

6.6.7.3.2 Folding out the outrigger

Risk of crushing when swinging the outrigger out or in!
–

Ensure all personnel is outside the danger zone.

–

Indicate the danger through visual and audible warning

signals.

People within the range of motion may be crushed and seri-

ously injured.

Ballasting mode

WARNING

Start-up and setup

27.04.2020

140.5.204 Telescopic crane

271

Reference

Only

Содержание 140.5.204






























































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 140.5.204

Отзывы:

Бренды по названию

Популярные бренды

Manitowoc 140.5.204, Руководство по эксплуатации

Результаты поиска

Содержание 140.5.204

Отзывы:

Бренды по названию

Популярные бренды