Manitowoc 140.5.204 Скачать руководство пользователя страница 560

Страница: 560 / 669

7.20.2.4.3

Increase/reduce track width

To use the emergency control function to increase or reduce the

track width you must comply with the specifications for setting the

track width.

Chapter 6.6.7 “Setting the track width” on page 266

Requirement:

Uppercarriage is locked.

Extension mode, the boom length, and the boom angle for

changing the track width are set.

The machine has been stabilized ready for the track width to

be changed.

The emergency control is activated.

Pull the

[Emergency control: Set track width]

lever toward

you until the maximum track width is set.

Push the

[Emergency control: Set track width]

lever away

from you.

Pull lever toward you

Push lever away from you

The track width is increased.

The track width is decreased.

7.20.2.4.4

Extending/retracting ballasting cylinders

To use the emergency control function to extend or retract the bal-

lasting cylinders you must comply with the specifications for bal-

lasting the machine that apply to the relevant application.

Chapter 6.6.9 “Ballasting the machine” on page 305

Chapter 6.7.7 “Removing the ballast” on page 403

Chapter 6.7.8 “Partially ballasting the machine” on page 405

Further notes

Increasing the track width

Decreasing the track width

Emergency control: setting the

track width

Further notes

Operation

27.04.2020

140.5.204 Telescopic crane

560

Reference

Only

Содержание 140.5.204






























































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 140.5.204

Отзывы:

Бренды по названию

Популярные бренды

Manitowoc 140.5.204, Руководство по эксплуатации

Результаты поиска

Содержание 140.5.204

Отзывы:

Бренды по названию

Популярные бренды