Manitowoc 140.5.204 Скачать руководство пользователя страница 411

Страница: 411 / 669

Risk of electric shocks and burns by touching live parts!
When working on live parts, touching the part involves the

risk of an electric shock.

–

Before starting work on electric lines or other live parts,

disconnect the power supply.

–

Observe the general guidelines for working with electrical

system.

In the event of a power outage, the settings on the SENCON

will not be saved.

7.2 Starting up daily operation

Risk of injury due to uninspected machine.
–

Perform routine inspections of the machine according to

the maintenance schedule before start-up.

–

Do not operate the machine if a defect has been discov-

ered.

Failure to properly perform routine maintenance can result in

unexpected functioning. This can cause serious injury.

7.2.1 General maintenance work

Carry out the following inspections every day:

Visually inspect the machine for defects according to the

checklist.

Check the machine's safety equipment for completeness

and proper mounting.

Check the soil strength and machine stability.

Check the maintenance plan for due maintenance tasks.

Perform daily maintenance tasks as per the maintenance

plan.

WARNING

NOTICE

Safety instructions

WARNING

Daily inspections

Daily maintenance tasks

Operation

27.04.2020

140.5.204 Telescopic crane

411

Reference

Only

Содержание 140.5.204






























































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 140.5.204

Отзывы:

Бренды по названию

Популярные бренды

Manitowoc 140.5.204, Руководство по эксплуатации

Результаты поиска

Содержание 140.5.204

Отзывы:

Бренды по названию

Популярные бренды