Manitowoc 140.5.204 Скачать руководство пользователя страница 500

Страница: 500 / 669

The load and its center of gravity are known.

The load is suspended vertically.
–

The upper attachment point on the load is fastened to the

rope of the attachment.
The rope of the attachment carries the entire weight of the

load.

–

The lower attachment point on the load is fastened to the

rope of the boom.
The rope of the boom is not bearing any weight.

The rope of the boom must be lightly tensioned so that the

rope does not drag.

Observe the set allocation of the winches to the joysticks.

Tilt the joystick in the

[Raise winch 2]

direction until the load

is at the horizontal position.

Tilt the joysticks simultaneously in the

[Lower winch 1]

and

[Lower winch 2]

direction.

The load is lowered.

The load is horizontal during the entire lowering process.

7.15.4.4.3

Moving the load vertically with two winches

Requirement:

The extension mode is set for the application at hand.

The operation parameters for Tilt-Up Panel Lifting have been

set on the SENCON.

The status indicator of the

[Tilt-Up Panel Lifting]

quick-select

icon lights up yellow.

Operation

27.04.2020

140.5.204 Telescopic crane

500

Reference

Only

Содержание 140.5.204






























































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 140.5.204

Отзывы:

Бренды по названию

Популярные бренды

Manitowoc 140.5.204, Руководство по эксплуатации

Результаты поиска

Содержание 140.5.204

Отзывы:

Бренды по названию

Популярные бренды