Manitowoc 140.5.204 Скачать руководство пользователя страница 510

Страница: 510 / 669

7.16.3

Initiating regeneration manually

Preconditions:

The machine control requests manual regeneration.
The

[Load status of the exhaust aftertreatment system]

and

[Exhaust temperature]

information symbols flash.

The machine is safely parked.

The load is set down.

If a grapple is installed:
The grapple is closed.
For running the regeneration process, the machine performs

the "Close grapple" action, which will undesirably cause an

open grapple to be closed.

The automatic idle stop is deactivated.

Start the machine and allow the diesel engine to idle for 5–

10 minutes.

Press the

[Exhaust aftertreatment system regeneration]

button to the left.

Regeneration is carried out.

The engine speed increases.

The exhaust temperature increases.

Wait for regeneration to end.

After regeneration, the following happens:

The

[Load status of the exhaust aftertreatment system]

information symbol is shown in gray again.

The motor runs at idling speed.

The exhaust gas and surfaces of the exhaust system

have an increased temperature.

Allow the exhaust system to cool for 5–10 minutes with the

engine running after regeneration.

The exhaust temperature is normal if the

[Exhaust temperature]

information symbol appears in

gray.

Manually initiated exhaust aftertreatment system regeneration can

be canceled by taking one of the following actions:

Suppress exhaust aftertreatment system regeneration.

Actuate the emergency stop switch.

Turn off the engine with the ignition key.

(The

[Engine start]

button is deactivated during manually initiated

regeneration.)

Aborting manual regeneration

Operation

27.04.2020

140.5.204 Telescopic crane

510

Reference

Only

Содержание 140.5.204






























































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 140.5.204

Отзывы:

Бренды по названию

Популярные бренды

Manitowoc 140.5.204, Руководство по эксплуатации

Результаты поиска

Содержание 140.5.204

Отзывы:

Бренды по названию

Популярные бренды