Manitowoc 140.5.204 Скачать руководство пользователя страница 620

Страница: 620 / 669

9.6.3 Moving the machine onto the transport vehicle

Danger of tipping when located on transport vehicle
Slewing the uppercarriage on the transport vehicle may cause

the machine to tip off the transport vehicle. This can cause

death or serious injury.

–

On the transport vehicle and during loading and

unloading, the uppercarriage must be in 0° position.

–

Uppercarriage is locked.

–

Unload the machine without changing the direction of the

machine:
–

Loading in forward direction - unloading in reverse

direction

–

Loading in reverse direction - unloading in forward

direction

Risk of accident from starting in the wrong direction
–

Before moving off, ascertain the direction of travel, the

direction of steering, and the uppercarriage position and

move the machine accordingly.

–

Drive slowly and carefully.

Setting the uppercarriage position to 180° inverts the direction

of travel and the direction of steering. If the machine is incor-

rectly moved against the expected direction of travel, this can

lead to accidents. This can cause injury to persons.

9.6.3.1

Setting the operating mode

Symbol for

operating

parameters

Value to be

applied

1.5°

<=0.1 m/s

0 t

Main boom

according to

current setup

status of the

machine

9.6.3.2

Moving the machine onto the transport vehicle

The machine is not ballasted.

Uppercarriage is locked.

The boom is fully retracted.

The bottom hook block is secured against swinging on the

uppercarriage.

The boom angle is 20°.

Push the

[Release travel mode ]

switch to the right.

Press the

[Drive slow – fast]

switch to the left.

DANGER

WARNING

Operation parameters to be set

Prerequisite

Transport

27.04.2020

140.5.204 Telescopic crane

620

Reference

Only

Содержание 140.5.204






























































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 140.5.204

Отзывы:

Бренды по названию

Популярные бренды

Manitowoc 140.5.204, Руководство по эксплуатации

Результаты поиска

Содержание 140.5.204

Отзывы:

Бренды по названию

Популярные бренды