IMPULSE•G+/VG+ Series 4 Technical Manual
November 2022
Page 214
oFA03
to
oFA17
SI-
AI-A3
AO-A3
DI-A3
DO-A3
S4I
S4IO
Option Card Fault at Option Port
CN5-A.
• Option card or
hardware is damaged.
• Cycle power to the VFD.
• If the problem continues,
replace the option card, control
board or the entire VFD.
Contact Magnetek for
instructions on replacing the
control board.
oFA30
to
oFA43
SI-
Communication Card Fault at
Option Port CN5-A.
• Option card or
hardware is damaged.
• Cycle power to the VFD.
• If the problem continues,
replace the option card, control
board, or the entire VFD.
Contact Magnetek for
instructions on replacing the
control board.
oFB03
to
oFB17
AO-A3
DO-A3
S4I
S4IO
Option Card Fault at Option Port
CN5-B.
• Option card or
hardware is damaged.
• Cycle power to the VFD.
• If the problem continues,
replace the option card, control
board or the entire VFD.
Contact Magnetek for
instructions on replacing the
control board.
oFC03
to
oFC17
AO-A3
DO-A3
S4I
S4IO
Option Card Fault at Option Port
CN5-C.
• Option card or
hardware is damaged.
• Cycle power to the VFD.
• If the problem continues,
replace the option card, control
board or the entire VFD.
Contact Magnetek for
instructions on replacing the
control board.
oPE05
SI-
AI-A3
DI-A3
S4I
S4IO
Run command/frequency
reference source selection error.
• Frequency reference
is assigned to an
option (B03-01 = 3),
but an option is not
connected.
• Reconnect the option to the
VFD.
oPE06
PG-X3
PG-B3
Control Method Selection Error
• A control method has
been selected that
requires a PG option
card, but one is not
installed (A01-02 = 1
or 3).
• Connect a PG option card.
• Correct the value set to A01-02.
oPE07
AI-A3
Multi-function Analog Input
Selection Error.
• At least two analog
input terminals are set
to the same function.
• Analog input terminal
and pulse train input
are set to the same
function.
• Adjust H03-02, H03-06, and
H03-10 settings so functions no
longer conflict.
Display
Card
Description
Cause
Possible Solution
Содержание Impulse G+ series 4
