IMPULSE•G+/VG+ Series 4 Technical Manual
November 2022
Page 132
5.5 Option Card Parameters
•
F01 Encoder Feedback (PG-X3) Option Card Setup
•
F02 Analog Input (AI-A3) Option Card Setup
•
F04 Analog Output (AO-A3) Option Card Setup
•
F05 Digital Output (DO-A3 or S4IO) Option Card Setup
•
F06 Profibus-DP (SI-P3) Option Card Setup
•
F07 Ethernet/IP (SI-EN3) and Modbus TCP/IP (SI-EM3) Option Card Setup
NOTE:
See the C09 parameter group for DI-A3, and additional S4I/S4IO setup.
5.5.1 Encoder Feedback (PG-X3) Option Card Setup
Table 5-63: PG-X3 Parameter Settings (VG+ Only)
Parameter
Display
Function
Range
Default
F01-01
PG1 Pulses/Rev
PPR for the encoder connected to the PG-X3 card
seated in port CN5-C.
0–60000 ppr
1024
F01-02
PG1 Rotation Sel
Changing this parameter has the same effect as
swapping A+ and A- encoder wires.
0, 1
0
0 Fwd = C.C.W.
1 Fwd = C.W.
F01-03
PG1 Output Ratio
Division ratio for the pulse monitor.
Example: For a ratio of 1/32 between the PG card
pulse input and output, set F01-03 = 032 (where n = 0
and m = 32).
1–132
1
F01-04
PG1 #Gear Teeth1
Gear ratio between the motor shaft and the encoder.
A gear ratio of 1 will be used if F01-04 or F01-05 = 0.
0–1000
0
F01-05
PG1 #Gear Teeth2
Gear ratio between the motor shaft and the encoder.
A gear ratio of 1 will be used if F01-04 or F01-05 = 0.
0–1000
0
F01-06
PGO-1-H
Delay time for PGO-1-H detection. A setting of 0
disables PGO-1-H detection.
0–100 ms
15
F01-11
PG2 Pulses/Rev
PPR for the encoder connected to the PG-X3 card
seated in port CN5-B.
0–60000 ppr
1024
F01-12
PG2 Rotation Sel
Changing this parameter has the same effect as
swapping A+ and A- encoder wires.
0, 1
0
0 Fwd = C.C.W.
1 Fwd = C.W
F01-13
PG2 #Gear Teeth1
Gear ratio between the motor shaft and the encoder.
A gear ratio of 1 will be used if F01-13 or F01-14 = 0.
0–1000
0
F01-14
PG2 #Gear Teeth2
Gear ratio between the motor shaft and the encoder.
A gear ratio of 1 will be used if F01-13 or F01-14 = 0.
0–1000
0
F01-15
PG2 Output Ratio
Division ratio for the pulse monitor.
1–132
1
F01-16
PGO-2-H
Delay time for PGO-2-H detection. A setting of 0
disables PGO-2-H detection.
0–100 ms
15
Содержание Impulse G+ series 4
