IMPULSE•G+/VG+ Series 4 Technical Manual
November 2022
Page 171
5.7.8 Automatic Fault Reset
When a fault occurs during operation, it can be automatically reset.
Table 5-101: Automatic Fault Reset Parameter Settings
* To program L09-04 or L09-05, refer to the example on the following page and follow steps 1 through 4:
1.
Assign 1 to each fault code to enable the auto reset.
2.
Assign 0 to each fault code to disable the auto reset.
3.
Convert all Digits (1 to 4) from binary to hex.
4.
Program L09-04 or L09-05 by entering the hex number obtained from step 3.
Figure 5-25: Automatic Fault Reset
Parameter
Display
Function
Range
Default
L09-01
Reset Select
Activates the fault auto-reset function.
0, 1
1
0 Disabled
1 Enabled
L09-02
Reset Attempts
Number of reset attempts.
Reset attempt counter is returned to zero if
no faults occur within a ten minute period.
0–10
3
L09-03
Reset Time
Reset starting time.
0.5–600.0 sec
0.5
L09-04*
Reset Flt Sel 1
Reset Fault Select 1.
0–FFFF
4001
L09-05*
Reset Flt Sel 2
Reset Fault Select 2.
0–FFFF
E000
L09-06
Flt Contact Sel
Fault contact operation during reset
attempts
0, 1
0
0 Flt Outp Disabld
1 Flt Outp Enabled
(No Fault Relay Output or Fault Output)
Time of
L09-03
Run
Command
Frequency
Output
Brake
Command
Fault Happens
Auto-Reset
Out (if enabled
by H02-01=20)
AND Fault is
reset by
L09-04/5
Содержание Impulse G+ series 4
