IMPULSE•G+/VG+ Series 4 Technical Manual
November 2022
Page 73
5.1.8 Run Select
If the run reference/speed reference is switched between serial mode and VFD terminal mode, B03-07 determines
action after the switch.
Table 5-9: Run Select Parameter Settings
Parameter
Display
Function
Range
Default
B03-07
LO/RE RUN Sel
Determines action after switching Run/Speed
reference source.
0, 1
0
0 Cycle Extrn RUN
The run command must be cycled in order for
the new source to be activated.
1 Accept Extrn RUN
A new run command is not required for the
new source to be activated. Operation will
continue.
B03-08
RUN CMD at PRG
Determines whether the VFD is allowed to run
while inside the Programming menu.
0–2
0
0 Run
Disabled@PRG
Run command not accepted while in
Programming menu.
1 Run
Enabled@PRG
Run command is accepted while in
Programming menu.
2 PRG Only @ Stop
Prohibit entering Programming menu while
running.
B03-10
AllowRun@PowerUp
Determines how the VFD reacts if a run
command is active when the VFD powers up.
0, 1
0
0 Cycle Ext Run
A new Run command must be issued after
power up.
1 Accept Ext Run
Motor will start immediately after power up if a
Run command is already enabled.
B03-15
Ref Source 2
Determines what the VFD will use for
Frequency Reference. Enabled by
H01-0x = 1F.
0–4
0
0 Operator
Keypad
1 Terminals
Terminals or Analog Input
•
S4IF Interface Board
•
S4I Digital Input Option Card
•
S4IO Digital Input/Output Option Card
•
DI-A3 Digital Input Option Card
2 Serial Com
Serial communication
•
RS485/422 Serial Communications (R+,
R-, S+, S-)
3 Option PCB
Communication Option card (Port CN5-A)
•
EtherNet/IP
•
Modbus TCP/IP
•
PROFINET
•
PROFIBUS-DP
4 Pulse Input
Pulse input via Terminal RP (H06-01)
Содержание Impulse G+ series 4
