manualshive.com logo in svg

MagneMotion MagneMover LITE, Руководство пользователя, Страница: 23 / 382

Поделиться
Скачать
MagneMotion MagneMover LITE Скачать руководство пользователя страница 23

Changes

Overview

MagneMover LITE User Manual

xxi

Rockwell Automation Publication MMI-UM002E-EN-P - March 2016

Added 

File Maintenance

 instructions. Added 

mechanical drawings

 for the railless motors. 

Added railless motors to the 

Stand System Installation

 section. Added information and proce-

dures for the Precision Rail option, including; 

Precision Rail Option Components

 overview, 

Precision Rail Option Hazard Locations

, 

Label Identification and Location

 on the precision 

rail components, design information for the 

Transport System Options

, 

Precision Rail Instal-

lation

 information including 

Replace Precision Rail Vehicles

, and 

Preventive Maintenance

, 

Troubleshooting

, and 

Repair

 procedures.

Updated the 

Regulatory Compliance

 and 

Safety Considerations

 sections. Updated the Puck 

description in the 

Transport System Layout

 section. Updated the System Design 

Overview

 and 

Design Guidelines

. Updated the description of attractive force in the 

Design Guidelines

. Cor-

rected the 

Magnet Arrays

 description. Updated all 

mechanical drawings

 to show both milli-

meters and inches. Corrected the power supply connections and indicators tables for the 
Power Supply and the NC-12 Node Controller. Corrected the NC-12 Node Controller connec-
tions and indicators tables. Updated the Magnet Hazard Warnings throughout the manual. 
Updated the list of 

Required Tools and Materials

 for installation. Updated the communica-

tions and power cable connection illustrations. Updated the 

Transport System Limits

. Updated 

the 

Replace Puck Wear Surfaces

 procedure.

Removed all references to the Standard Node Controller, which has been replaced by the 
NC-12 Node Controller. Support for the Standard Node Controller including software, spare 
parts, technical support, and service continues to be available. Removed all references to the 
MM LITE G3 series motors, switches, and pucks, which have been replaced by the G4 series 
motors, switches, and pucks. The G3 series motors, switches, and pucks are discontinued 
items and are not UL Recognized. Support for the G3 series motors, switches, and pucks 
including software, spare parts, technical support, and service continues to be available.

Rev. E

Added information about the 

Precision Locator

 option. Added 

Pneumatic Hazards

, 

Handling 

Magnet Arrays

, and 

Shipping Magnet Arrays

 to 

Safety

. Added 

Motor Cogging

, 

Electrical 

Wiring

, 

Magnet Array Use

, 

Motor Mounting Methods

, 

System Stands

, and 

Transport System 

Configuration

 to the 

Transport System Design

 section. Added exposed materials identification 

to the 

Mechanical Specifications

. Added the operating voltage range for the motors, updated 

the motor power requirements, and added a note about the PTC (positive temperature coeffi-
cient) resistor used in the motors to the 

Electrical Specifications

. Added cable sizing and 

grounding to 

Installing Motor Power Cables

. Added descriptions of 

Motor Cogging

, 

Safe 

Stopping Distance Movement

, 

Moving Vehicles by Hand

, and the 

Electrical System

 to the 

The-

ory of Operation

 section. Added 

Transport System Simulation

, 

Precision Rail Operation

, and 

Precision Locator Operation

 to the 

Operation

 chapter. Added 

Cleaning Magnet Arrays

 to the 

Preventive Maintenance

 section. Added 

Light Stack Troubleshooting

. Added 

Separating Mag-

net Arrays

 to the 

Repair

 section.

Restructured the manual to clearly identify the 

Precision Rails

 as an option. Updated the 

Transport System Software Overview

 to include the Virtual Scope. Clarified the description of 

the 

Gateway Node

. Moved the Magnet Array Types information from 

Specifications and Site 

Содержание MagneMover LITE































































































































































































































































































































































































Отзывы:

Нет отзывов