MagneMotion MagneMover LITE, Руководство пользователя, Страница: 64 / 382

Safety
Mechanical Hazards
22 MagneMotion
Rockwell Automation Publication MMI-UM002E-EN-P - March 2016
Mechanical Hazards
The MagneMover LITE transport system is a complex electromechanical system. Only per-
sonnel with the proper training should install, operate, or service the MM LITE transport sys-
tem.
All facilities to the MagneMover LITE transport system must be disconnected as outlined in
the facility’s lockout/tagout procedure before servicing, or injury may result from the auto-
matic operation of the equipment. The proper precautions for operating and servicing
remotely controlled electromechanical equipment must be observed. These precautions
include wearing safety glasses, safety shoes, and any other precautions specified within the
facility where the MM LITE components are being used.
CAUTION
Crush Hazard
Moving mechanisms have no obstruction sensors.
Do not operate the MagneMover LITE components without
barriers in place or personal injury could result in the squeez-
ing or compression of fingers, hands, or other body parts
between moving mechanisms.
CAUTION
Automatic Movement Hazard
Whenever power is applied, the possibility of automatic
movement of the vehicles (pucks) on a MagneMover LITE
transport system exists, which could result in personal injury.
CAUTION
Heavy Lift Hazard
Some of the MagneMover LITE components can weigh as
much as 14.5 kg [32 lb].
Failure to take the proper precautions before moving them
could result in personal injury.
Use proper lifting techniques when moving any Magne-
Mover LITE components. Steel toe shoes should be worn at
all times when working on the MagneMover LITE transport
system.
kg