manualshive.com logo in svg

MagneMotion MagneMover LITE, Руководство пользователя, Страница: 48 / 382

Поделиться
Скачать
MagneMotion MagneMover LITE Скачать руководство пользователя страница 48

Safety
Safety Considerations

6

MagneMotion

Rockwell Automation Publication MMI-UM002E-EN-P - March 2016

•

Ensure that the MagneMover LITE components receive proper air flow for cooling.

•

Do not remove safety labels or equipment identification labels.

•

Turn OFF power before inserting or removing power cables.

•

Use of the MagneMover LITE components for any purpose other than as a linear 
transport system is not recommended and may cause damage to the MagneMover 
LITE components or the equipment they are connected to.

•

Always operate the MagneMover LITE transport system with appropriate barriers in 
place to prevent contact with moving objects by personnel.

•

Do not install or operate the MagneMover LITE transport system if any of the compo-
nents have been dropped, damaged, or are malfunctioning.

•

Keep cables and connectors away from heated surfaces.

•

Do not modify the connectors or ports.

Содержание MagneMover LITE































































































































































































































































































































































































Отзывы:

Нет отзывов