manualshive.com logo in svg

MagneMotion MagneMover LITE, Руководство пользователя, Страница: 351 / 382

Поделиться
Скачать
MagneMotion MagneMover LITE Скачать руководство пользователя страница 351

Maintenance

Repair

MagneMover LITE User Manual

67

Rockwell Automation Publication MMI-UM002E-EN-P - March 2016

Replacing Bushings on Pallet

The bushings used to locate the pallet can be removed and replaced if they become damaged 
or worn due to extended use.

Required Tools and Equipment

•

100-0097-30 – Loctite 243, Thread locker Anaerobic Adhesive, Blue.

•

200-2342-00 – Tapered Bushing, Hole, Pallet, ML-PL.

•

200-2342-01 – Tapered Bushing, SLOT, Pallet, ML-PL.

•

100-2457-01 – Pin, Dowel, Ø2 mm X 5 mm L, 18-8 SS, per DIN 7-M6 (2X).

•

100-2202-05 – Nut, Jam, Hex, M6x1, 18-8 (A2) SS, per DIN 439B (2X).

•

Isopropyl Alcohol.

•

Torque wrench with the following bits:

•

6 mm.

CAUTION

Crush Hazard

Strong magnets in use.
To avoid severe injury:
•

Handle only one puck at a time.

•

Do not place any body parts, such as fingers, between a 
magnet array and any ferrous material or another magnet 
array to avoid injury from strong magnetic attractive 
forces.

•

Pucks or magnet arrays not being used should be secured 
individually in isolated packaging.

Содержание MagneMover LITE































































































































































































































































































































































































Отзывы:

Нет отзывов