manualshive.com logo in svg

MagneMotion MagneMover LITE, Руководство пользователя, Страница: 190 / 382

Поделиться
Скачать
MagneMotion MagneMover LITE Скачать руководство пользователя страница 190

Installation
Unpacking and Inspection

4

MagneMotion

Rockwell Automation Publication MMI-UM002E-EN-P - March 2016

NOTE:

Save the shipping packaging for possible future use. If any part of the MagneMover 
LITE components are shipped, the original shipping packaging must be used. If the 
original packaging has become lost or damaged, contact MagneMotion for replace-
ments.

1.

Upon receiving the packages, visually verify the packaging is not damaged. Inform the 
freight carrier and MagneMotion of any inspection discrepancy.

2.

Open each shipping package and verify the contents against the shipping documents.

3.

Carefully inspect the MagneMover LITE components and all additional items for 
signs of damage that may have occurred during shipping.

4.

Move all items to their destination (refer to 

Transport System Installation

 on 

page 5-5

).

CAUTION

Heavy Lift Hazard

Some of the MagneMover LITE components can weigh as
much as 14.5 kg [32 lb]. Failure to take the proper precau-
tions before moving them could result in personal injury.

Use proper lifting techniques when moving any Magne-
Mover LITE components. Steel toe shoes should be worn at
all times when installing the MagneMover LITE.

kg

Содержание MagneMover LITE































































































































































































































































































































































































Отзывы:

Нет отзывов