MagneMotion MagneMover LITE Скачать руководство пользователя страница 71

Страница: 71 / 382

MagneMover LITE User Manual

Rockwell Automation Publication MMI-UM002E-EN-P - March 2016

Design Guidelines

Overview

This chapter provides guidelines for designing a transport system using the MagneMover

LITE components.

Included in this chapter are:

•

Design guidelines for laying out the MagneMover LITE transport system and creating
interfaces to the system.

•

Design guidelines for using MagneMover LITE motors and magnet arrays.

•

Guidelines for electrical wiring.

•

Design guidelines for the vehicles and guideways.

•

Guidelines for motor mounting.

•

Guidelines for option configuration.

•

Guidelines for transport system configuration.

Содержание MagneMover LITE































































































































































































































































































































































































Результаты поиска

Содержание MagneMover LITE

Отзывы:

MagneMotion MagneMover LITE, Руководство пользователя, Страница: 71 / 382

Результаты поиска

Содержание MagneMover LITE

Отзывы: