manualshive.com logo in svg

MagneMotion MagneMover LITE, Руководство пользователя, Страница: 250 / 382

Поделиться
Скачать
MagneMotion MagneMover LITE Скачать руководство пользователя страница 250

Installation
Software

64

MagneMotion

Rockwell Automation Publication MMI-UM002E-EN-P - March 2016

Software

The MagneMover LITE transport system requires user-creation of the Node Controller Con-
figuration File and creation of Host Controller software to direct vehicle movement for the 
particular application and monitor transport system performance. MagneMotion provides a 
number of software tools to simplify the creation of the Node Controller Configuration File, 
for testing system operation, and for monitoring system operation. Refer to 

Transport System 

Software Overview

 on page 1-8

 for identification and descriptions of all software components.

Software Overview

Node Controllers supplied with the MagneMover LITE transport system ship with just a basic 
NC software image installed. All Node Controller related files (NC image, motor images and 
type files, and magnet array type files) must be uploaded to the Node Controller and activated 
before using the transport system. Refer to the 

Node Controller Web Interface User’s Manual

 

for details.

All MagneMover LITE motors ship with just a basic motor software image installed. The 
motor image files must be uploaded to the motors through the Node Controller.

Upgrades to the software can be uploaded through the network communications link. Refer to 
the Upgrade Procedure in the Release Notes supplied with the software upgrade.

NOTE:

Specific builds of MagneMotion's software may not implement all of the features 
described in this manual. Refer to the Release Notes provided with the software for 
additional information.

All software running on the MagneMover LITE transport system must be part of the 
same release. Refer to the Release Notes provided with the software for additional 
information.

Alterations or changes to the software should only be made by qualified MagneMo-
tion personnel or as directed by MagneMotion.

Software Configuration

Create the Node Controller Configuration File (node_configuration.xml) using the Configura-
tor to define the components of the transport system and their relationship to each other. Refer 
to 

Design Guidelines

 on page 3-1

 and the 

MagneMover

®

 LITE Configurator User’s Manual

 

for more details. The Configuration File must then must be uploaded to each Node Controller 
in the transport system before using the system. Refer to the 

Node Controller Web Interface 

User’s Manual

 for details.

Configure the Host Controller to control the transport system. Refer to the 

Host Controller 

TCP/IP Communication Protocol User’s Manual

, the 

Host Controller EtherNet/IP Communi-

Содержание MagneMover LITE































































































































































































































































































































































































Отзывы:

Нет отзывов