manualshive.com logo in svg

MagneMotion MagneMover LITE, Руководство пользователя, Страница: 66 / 382

Поделиться
Скачать
MagneMotion MagneMover LITE Скачать руководство пользователя страница 66

Safety
Pneumatic Hazards

24

MagneMotion

Rockwell Automation Publication MMI-UM002E-EN-P - March 2016

Pneumatic Hazards

The Precision Locator is connected to the facility’s compressed air system, which is capable 
of generating hazardous energy. The proper precautions for operating and servicing pneumatic 
equipment must be observed. These precautions include following facility lockout/tagout pro-
cedures, and any other specified action within the facility where the Precision Locator is being 
used.

The MagneMover LITE Precision Locator option is a low energy device, no additional pneu-
matic safety precautions are required.

CAUTION

Pneumatic Hazard

All pneumatic power to the MagneMover LITE transport
system must be disconnected per the facility’s lockout/tagout
procedure before servicing to prevent the risk of mechanical
movement.

Do not turn on power to the pneumatic system until after con-
necting all other transport system components.

Содержание MagneMover LITE































































































































































































































































































































































































Отзывы:

Нет отзывов