MagneMotion MagneMover LITE, Руководство пользователя, Страница: 249 / 382

Installation
Facilities Connections
MagneMover LITE User Manual 63
Rockwell Automation Publication MMI-UM002E-EN-P - March 2016
Light Stack Circuit
The MagneMover LITE transport system can use Digital I/O, provided through an NC-12
Node Controller, for monitoring and control of local options such as a Light Stack. The
optional Light Stack circuit is the responsibility of the user and requires a user-supplied
3-color light tower and a user-su5 - 35 VDC power supply (sized for the Light Stack)
for the Digital Outputs. Refer to
Figure 4-48 on page 4-65 for the Digital I/O Equivalent Cir-
cuits. Refer to Light Stacks on page 6-17 for the Light Stack circuit. Refer to the Magne-
Mover
®
LITE Configurator User’s Manual for information on configuring a Light Stack.
General Purpose Digital I/O
The MagneMover LITE transport system can use Digital I/O, provided through an NC-12
Node Controller, to allow the Host Controller to monitor and control Digital Inputs and Out-
puts. Refer to
Figure 4-48 on page 4-65 for the Digital I/O Equivalent Circuits. Refer to the
Host Controller TCP/IP Communication Protocol User’s Manual or the Host Controller Eth-
erNet/IP Communication Protocol User’s Manual for the command details on performing
these operations.